Installation guide

Installation Instructions
Cutout for Single Built-In Oven
Allow 7/8" for
overlap of oven
over side edges
of
2"x4" or
runners
Allow a minimum of 20"
for clearance to adjacent
corners, drawers, walls,
etc. when door is open
Cabinet
Width
27"
Cutout
Width
25" iin.
Allow 1"for_.
overlap of oven
top and bottom
of cutout
_L Junction Box
/
Location
}
22" Min.
above
utout base rail
i Height I
27 5/8" Min.
I 28 1/8" Max. I
I
_ Alternate
Junction Box
Location
Recommended
minimum cutout location
from floor 32 1/2"
Cabinet Width 27"
Recommended
Minimum
Cutout Location
from Floor
Cutout Depth
Cutout Width
Cutout Height
32 1/2"
23 1/2" Min.
25" Min.
25 1/4" Max.
27 5/8" Min.
28 1/8" Max.
If the cabinet does not have a solid bottom,
two braces or runners must be installed to
support the weight of the oven. For single
ovens, the runners and braces must
support 150 Ibs.
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
24"
2" x4" or
Equivalent
Runners
I
<-_ 18" "_1
- 27
This oven is not approved for
stackable or side by side installation.
5