Installation guide

Installation Instructions
Cutout for Double Built-In Oven
Allow 7/8" for
overlap of oven
over side edges
of cutout ----...._
Cabinet ___
-- Width
27"
Cutout it"
Width
25" Min.
25 1/4" Max.
2" x4"or
equivalent
runners
20 _
Allow a minimum of 20"
for clearance to adjacent
corners, drawers, walls,
etc. when door is open Allow 1" for /
overlap of oven
top and bottom
of cutout
Junction Box
Location
Above
base rail
Cutout
Height
49 11116" Min.
50 118" Max.
Recommended
minimum cutout location
from floor 13 1/4"
Cabinet Width 27"
Recommended
Minimum
Cutout Location
from Floor
Cutout Depth
Cutout Width
Cutout Height
13 1/4"
23 5/8" Min.
25" Min.
25 1/4" Max.
49 11/16" Min.
50 1/8" Max.
NOTE: If the cabinet does not
have a front frame and the
sides are less than 3/4" thick,
shim both sides equally to
establish the cutout width.
If the cabinet does not have a solid bottom,
two braces or runners must be installed to
support the weight of the oven. For double
ovens, the runners and braces must
support 275 Ibs.
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
Suitable
Bracing
to Support
Runners
l ,8,,
Over Centerline
of Cabinet
2" x4"or
Equivalent
Runners
6