Manual

Usingtheclockandtimer.
Makesurethe clockissetto the
correcttimeof deg
To Set the Clack
The dock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of
day cannot be changed during a timed
baking or serf-cleaning cycle.
[] Pressthe CLOCKpad.
[] Press the HOURand MIN+ or-
pads to set the time of day.
[] Press the _rAffr pad.
Thetimer is a minute timer only,
Thetimer doesnot controloven
operations.Themaximumserdngon
the timeris9hoursand 59minutes.
ToSet the 77mar
[] Pressthe KITCHENTIMER
ON/OFFpad.
[] Press the HOURand MIN +or-
pads until the amount of time
you want shows in the display.
If you make a mistake, press
KITCHENTIMERON/OFFand beon
a_n.
[] Press the STARTpad.
AfterpressingtheSTARTpad,$ETdisappears;
thistellsyouthetimeiscountingdown,although
thedisplaydoesnotchangeuntiloneminute
haspassed.
When the timer reaches .'00,the
control willbeep 3 times followed
by one beep every 6 seconds until
the KITCHENTIMERO/g/OFFpad
is pressed.
The6 secondtonecanbecanceledbyfollowing
thestepsintheSpecialfeaturesof Fouroven
controlsectionunderTonesat theEndofa
timedCycle.
ToReset the Timer
If the display is stillshowing the time
remaining, you may change it by pressing
the Kr_HEN TIMERO/gtOFFpad, then
press the HOURand MIN+or - pads until
the time you want appears in the display.
If the remaining time isnot in the display
(dock, delay start or cooking time are in
the display), recall the remaining time by
pressing the MTCHENTIMERON/OFFpad
and then press'ragthe HOURand MIN +
or- pads to enter the new time you want.
To Cancel the 7-tmer
Pressthe KITCHENTIMERON/OFF
pad twice.
14