Installation guide

Installation Instructions
Cutout for Built-In Oven W/Microwave
Allow 7/8"
for overlap of
oven over side ....
edges of cutout_
Allow a minimum of 20"
for clearance to adjacent
corners, drawers, walls, etc.
when doors are open
CABINET
27"
CUTOUT
WIDTH
25" MIN.
25 1/4" MAX.
2" x 4"
or _
equivalentt
runners
JUNCTION BOX
LOCATION
CUTOUT _[
HEIGHT 48"
41 1/8" MIN.
MAX. TO bottom
of junction box
Alternate
junction box
location
Cabinet Width 27"
Recommended
Cutout Location
From Floor ..... 21 5/8"
Cutout Depth .23 1/2"
Cutout Width ..25" Min.
........................ 25 1/4" Max.
Cutout Height 41 1/8" Min.
........................ 41 1/4" Max.
Overall Height 41 5/8"
Overall Width .. 26 5/8"
Allow 1" for
overlap of oven
top and bottom
of cutout
Recommended
cutoutlocation
floor
21 5/8"
If the cabinets do not have a solid bottom, then
two braces or runners must be installed to
support the weight of the oven. The runners
and braces must support 275 pounds.
NOTE: If the cabinet does not have
a front frame and the sides are
less than 3/4" thick, shim both
sides equally to establish the
cutout width.
i
L_
_27"
2"x4"or
Equivalent
Runners
lm
NOTE: If using equivalent
runners, then the center
of the equivalent runners
should be 20 112".