Manual

Usingthe self-cleaning lower oven.
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
Self q
lean_)
1 2 3 4 5
6 7 8 9 0
tart }
On/Off
1 2 3 4 5
How to Belay the Start of Cleaning (availableonJKP86modelsonly)
[_ Press the Self Clean pad.
[_ Using the number pads, enter tile
desired clean time.
[_ Press tlle Delay Start pad. The
earliest start 6me you can set will
appear in tile display:
[_] Using the number pads, enter tile
time of day you want tile clean cycle
to start.
The door locks automatically. The display
will show file start time. It will not be
possible m open the oven door until
the temperature drops below the lock
temperature and the LOCKEDor LOCKED
DOORlight goes off:
_i_qlenthe LOCKEDor LOCKEDDOORlight
goes off; you will be able to open tile
dooI:
6 7 8 9 0
&q
[_] Press tile Startpad.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp clod1 after
tile oven cools.
If whitespotsremab,removethemwith a
soap-filledsteelwoolpadandrinsethoroughly
witha vinegarandwatermixture.
These deposits are usually a salt
residue tllat cannot be removed by
tile clean cycle.
If tile oven is not clean mCterone clean
cycle, repeat tile cycle.
You cannot set tile oven for cooking
until the oven is cool enough for tile
door to unlock.
While die oven is self-cleaning, you
can press the Clockpad m display
tile time of day. To return m the
clean countdown, press the Cooking
17mepad.
If die racks become hard m slide,
apply a small amount of vegetable oil
or cooking oil m a paper towel and
wipe the edges of the racks with tile
paper towel.
3O