Use and Care Manual

49-2000975 Rev. 1 13
How To Synchronize Left Burners
Selecting Cooktop Settings
■ Makesurethepanrestsflatontheglasscooktop.
Choosepansthatmatchthecircle/bridgeareaas
closely as possible.
■ Tousebothleftelementsatthesamesetting,push
and turn the control knob to , stopping at the
desired settings. It is normal to hear a clicking noise
when the elements are in sync mode.
■ Tousetheleftfrontsurfaceelementonly,pushand
turn the control knob to , stopping at the
desired settings.
Contentjustforthefollowingmodels:CP9530,CP9536
andJP7030,JP7036–BacklitKnobs.
WhenusingSyncBurnertheleftrearknoblightingwill
slightly flicker. The rear element is controlled by the front
element and briefly lights the knob as the two elements
heat. This is normal.
Choosetheelement/burnerthatisthebestfittothe
cookwaresize.Eachelement/burneronyournew
cooktop has its own power levels ranging from low to
high.Powerlevelsettingsnecessaryforcookingwillvary
depending on the cookware being used, the type and
quantity of food, and the desired outcome.
In general:
■ Uselowersettingsformelting,holding,and
simmering.
■ Usehighersettingsforheatingquickly,searing,and
frying.
■ For“WarmingZone”elementsintendedforholding
(some models), use the Med-Hi settings.
When keeping foods warm confirm selected setting is
sufficient to maintain food temperature above 140°F.
Largerelementsarenotrecommendedformelting.
Powerboilelementsarebestsuitedforboilingwater,
particularlywithpotsthatare9”orlarger.
USING THE COOKTOP:HowToSynchronizeLeftElements/SelectingCooktopSettings
Hi
boiling quickly
frying
searing
reducing
simmering
holding
melting
Low