User Manual
2
31-11047
Installation Instructions
PREPARE OPENING
SINGLE OVEN
NOTE: Locate an approved junction box in the suggested
location, a minimum of 23 7/8” above the runners.
Be sure the oven support is solid enough to support
90 pounds. Also be sure the oven support is level and
straight. There is no way to level the oven after installation.
If a solid bottom is used instead of runners, a 6” x 10”
rectangle must be cut out of the bottom (See Fig. 1) for
optimum performance and proper air circulation.
DIMENSIONS
A. Cabinet Width - 24”
B. Cutout Width - 22 1/2”
C. Cutout Height - 27 5/8” Min. 28 1/8” Max.
D. Cutout Depth - 23 1/2” Min.
E. Cutout Location - 32 1/2”
H. Overall Height - 28 1/4”
W. Overall Width - 23 3/4”
DOUBLE OVEN
NOTE: Locate an approved junction box in the
suggested location, a minimum of 48” above the runners.
Be sure the oven support is solid enough to support
155 pounds. Also be sure the oven support is level and
straight. There is no way to level the oven after installation.
If a solid bottom is used instead of runners, a 6” x 10”
rectangle must be cut out of the bottom (See Fig. 2) for
optimum performance and proper air circulation.
DIMENSIONS
A. Cabinet Width - 24” Min.
B. Cutout Width - 22 1/2”
C. Cutout Height - 48 1/8”
D. Cutout Depth - 23 1/2” Min.
E. Cutout Location - 12 3/4” Min.
H. Overall Height - 48 3/4”
W. Overall Width - 23 3/4”
Fig. 1 — Single Oven
Fig. 2 — Double Oven
2" x 4" or
Equivalent Runners
on 11" Centers
10"
Allow 7/8"
for overlap
of oven
over all
edges
of cutout.
Allow minimum of 20" for clearance
to adjacent corners, drawers, or walls, etc.
H
20"
20"
W
D
B
5"
A
Junction Box
Locations
23 7/8"
Min.
E
C
24"
11"
2" x 4" OR
EQUIVALENT
RUNNERS
24"
MIN.
6"
9"
MIN.
7"
10"
c c
10"
A
B
48" MIN.
C
E
D
H
W
ALLOW 7/8" FOR
OVERLAP OF OVEN
OVER ALL EDGES
OF CUTOUT
20" MINIMUM CLEARANCE TO
ADJACENT CORNERS, DRAWERS,
OR WALLS, ETC.
2" x 4" or
EQUIVALENT RUNNERS
JUNCTION
BOX
LOCATION
24"
11"
2" x 4" OR
EQUIVALENT
RUNNERS
24"
MIN.
6"
9"
MIN.
7"
10"
c c