Use and Care Guide
Table Of Contents
49-2000831 Rev. 0 7
USING THE RANGE:SurfaceUnits
Surface Units
WARNING
FIRE HAZARD: Never leave the range unattended with the cooktop on medium or high settings.
Keepflammableitemsawayfromthecooktop.Turnoffallcontrolswhendonecooking.Failureto
follow these instructions can result in fire, serious injury or death.
Throughout this manual, features and appearance may vary from your model.
NOTE: Before using the cooktop for the first time, clean it with ceramic cooktop cleaner. This helps protect the top
and makes cleanup easier.
How to Set
Push the knob in and turn in either direction to the
setting you want.
A surface ON indicator light will glow when any surface
unit is on
For glass cooktop surfaces:
A HOT COOKTOP indicator light will:
■ comeonwhentheunitishottothetouch.
■ stayonevenaftertheunitisturnedoff.
■ stayonuntiltheunitiscooledto
approximately 150°F.
Dual Surface Units and Control Knobs (on some models)
The surface unit has 2 cooking sizes to select from so you can match the size of the unit to the size of the cookware
you are using.
At both OFF and HI the control clicks
into position. You may hear slight
clicking sounds during cooking,
indicating the control is maintaining
your desired setting.
Be sure you turn the control knob to
OFF when you finish cooking.
Melt setting (on some models)
will melt chocolate or butter.
ModelswithaDual-Ring
surface element only
Using the Warming Zone (on some models)
WARNING
FOOD POISON HAZARD: Bacteria may grow in food at
temperatures below 140°F.
■ Alwaysstartwithhotfood.Donotusewarmsettingto
heat cold food.
■ Donotusewarmsettingformorethan2hours.
For models with knob, turn the control knob to On position.
For models with touch pads, press the Warming Drawer
or Warming Zonepad.Usethenumberpadtoselect
the temperature setting. Press 1 for Low, 2 for Medium
or 3 for High, then press Start.
NOTE :TheCancel/Offpaddoesnotturnoffthe
WarmingDrawerorWarmingZone.
NOTE : The surface warmer will NOT glow red like the
cooking elements.