Installation guide

Installation Instructions
Cutout for Built-In Oven
with Microwave
Allow 11/16" for
overlap of oven
over side edges
o1 cutout _
t
I
J
Allow a minimum of 21"
for clearance to adjacent
corners, drawers, walls,
etc, when door is open
Cabinet
_Width --
30"
Cutout Width
Opening
between
inside walls
must be
at least
28 112" wide
Allow minimum
1" for overlap of
oven top and
11/4', overlap of
bottom o1 cutout
1-201-1
I
Cutout
Height
42 3/16" Min.
42 1/4" Max.
Junction Box
, Location
28"
to Bottom of
Junction Box
Recommended
minimum cutout location
from floor 21 5/8"
Cabinet Width
Recommended
Minimum
Cutout Location
from Floor
Cutout Depth
Cutout Width
Cutout Height
30"
21 5/8"
23 112" Min.
28 1/2" Min.
28 5/8" Max.
42 3/16" Min.
42 1/4" Max.
NOTE: If the cabinet does not
have a front frame and the
sides are less than 3/4" thick,
shim both sides equally to
establish the cutout width.
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. The
runners and braces must support 255 Ibs.
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
Suitable
Bracing
to Support
Runners --
--,f_-_Ov 21 5/8"
er Centerline \
of Cabinet
x4"or
equivalent
runners
level with
bottom
of cutout
5