Manual

ge.com
| |
z |
31/2,
Maximum i
|
Glasscover
Lower Oven Light Bulb (onsomemodels)
NOTE: Theglasscover (onsome models)should
beremovedon/}/whencold Weannglate;(gloves
may offer a better grip.
Before replacing the bulb, disconnect
electrical power m the oven at the main
fllse or drcuit breaker panel. I,et the
bulb cool completely befi)re removing it.
For yore" safety, do not touch a hot bulb
with a damp cloth. If you do, the bulb
will break.
To remove:
Tm'n the glass cover cotmterclockwise
1/4 turn tmtil the tabs of the glass cover
clear the grooves of the socket. Remove
the bulb.
Toreplace:
Put in a new 40-watt appliance bulb.
Place the tabs of the glass cover into the
grooves of the socket. Tm'n the glass
cover clockwise 1/4 turn.
NOTE."
Z_A 40-wattappliancebulbissmallerthana
standard40-watthouseholdbulb.
Z_Instaflandtightenthecoverclockwise.
iJGReconnectelectricalpowertotheoven.
iJGFori_nprovedhghtlwinsidetheoven,clean
theglasscoverfrequent/}/usinga wetc/oth.
Thisshou/dbedonewhentheovenis
completelycool.
Socket
_eceo[acle
Bulb
Tab
/
Glasscover
Lower Oven Light Bulb (onsomemodels)
NOTE." The glass cover (on some
models) should be removed only when
cold. Wearing latex gloves may offer
a better grip.
CAUTION.Before replacing your
oven light bulb, dbconnect the electrical
power to the oven at the main fuse or
circuit breaker panel.
Be sm'e to let the light cover and bulb
cool completely:
For yore" saff't,/, do not touch a hot bulb
with bare hands or a damp cloth.
Toremove:
[] Tm'n the glass co_er
cotmterclockwise l/4 turn until the
tabs of the glass cover clear the
grooves of the socket.
Using glo_es or a (lD cloth, relnoxe
[] tile bulb b', pulling it straight out.
Toreplace:
[] Use a new 130-volt halogen bulb,
not to exceed 50 watts.
Using glo_es or a
[] ., , , (hT cloth, remoxe
tile bulb ti'om its packaoino Do not
touch the bulb with bare fingers.
Receptacle
4
(
Usegloves
orcloth
[] Push tile bulb straight into tile
receptacle all tile way:
[] Place tile tabs of tile glass coxer into
tile grooxes of tile socket. Turn tile
glass cover clockwise 1/4 turn.
For improved lighting inside
tile oven, clean tile glass cover
fi'equently using a wet cloth. This
should be done when tile oven is
completely cool.
[] ]_,ec(mnect electrical power to
tile oxen.
35