Installation guide

Installation Instructions

OUTSIDE BACK EXHAUST (Horizontal Duct)

INSTALLATION OVERVIEW

B1. Prepare Rear Wall

B2. Attach Mounting Plate to _rall

B3. Prepare Top Cabinet

B4. Adjust Blower

BS. Mount the Microwave Oven

I-_ PREPARING THE REAR WALL

FOR OUTSIDE BACK EXHAUST

_!_ Place the mounting plate against the rear wall and

align it with the holes drilled earlier.

[] Using a pencil, put clots through holes/notches F,

G, H and I (see above illusuadon). Remove the

mounting plate and draw lines extending through

the points. This will give the location and size of the

box cutout for the rear wall duct.

[] Use a saw (saber or keyhole) to cut out the opening.

_!_ Place the microwave in its upright position with the

top of the unit facing tap.

This microwave oven is shipped assembled for top

exhaust. You will need the exhaust adaptor for

installation in the rear wall opening. To remove the

exhaust adaptor flom the microwave oven:

Remove rope securing dampm.

Lift off the

Remove and blower plate

save screw _ _ and attached

• " uamper

that holds "_, / adaptor flom

blower plate ,, ./ the microwave.

to microwave ..... _..., ..,_

......... -"" _ Microwave

_ Slide exhaust adaptor to one side and remove it.