Installation guide

Installation Instructions

ALIGNING THE WALL PLATE

CAUTION: _4'ear glo_es

to a_oid cutting finget_ on

sharp edges.

Ho'eO Oeoter r:f co,

Area E Hole D

"-'-'- Hole B /

[]Draw a vertical line on the wall at the center of the

30" wide space.

[]Use the mortaring plate as the template for the rear

wall. Place the motmting plate on the wall, making

sm'e that the tabs are touching the bottom of the

cabinet or the level line drawu in Step C for cahinets

with front overhmag, Line up the notch mad ceuterlhm

on the bottmu of the mounting plate to the ceuterlhm

on the wall,

[] _4]_ile holding the mortaring plate with one hand,

draw drcles on the wall at holes A, B, C and D

(see illustration above/actual plate marked with

arrows). Four holes must be used for mounting,

[]

NOTE: Holes C and D are inside area E. If neither

C nor D is in a stud, find a stud somewhere in area E

and draw a fifth drcle to line up with the stud. It is

important to use at least one wood screw motmted

firmly ha a stud to support the weight of the microwave.

Set the mounting plate aside.

Drill holes on the circles. If there is a stud, drill a :"A6"

hole for wood scre_vs. For holes that don't line up with

a stud, drill a %" hole fin" toggle bolts.

NOTE: DO NOT MOUNT THE PLATE AT THIS

TIME.