Installation guide

Installation Instructions
MOUNT THE MICROWAVE
OVEN
FOR EASIER INSTALL__TION AND PERSONAL
SAFETY, WE RECOMMEND THAT TWO PEOPLE
INSTALL THIS MICROWAVE OVEN.
IMPORTANT: Do not grip or use handle
during installation.
NOTE: If vom" cabinet is metal, use tile nvlon
grommet around the power cord hole to prevent
cutting of tile cord.
NOTE: We recommend using filler blocks if tile
cabinet fl'ont hangs below tile cabinet bottom shelf.
IMPORTANT: If filler blocks are
not used, case damage may occur from
overtightening screws.
NOTE: When motmting
tile inicrowave oven,
thread power cord
through hole in bottom of
top cabinet. Kee I) it tight
throughout Steps 1-3. Do
not pinch cord or lift
oven by pulling cord.
_I,ifl microwave, tilt it
fin'ward, and hook
slots at back bottom
edge onto fl)m" lower
tabs of mo/mting
_ Rotate front of oxen
up against cabinet
bottoln,
_lnsert a self'aligning screw through top center
cabinet hole. Temporarily secure the oven by
turning tile screw at least two full turns atter tile
threads have engaged. (It will be completely
tightened later.) Be sure to keep power cord
tight. Be careful not to pinch the cord, especially
when mounting flush to bottom of cabinet,
CabinetFront
CabinetBottomShelf
FillerBlock
T quivalent
to Depth
of Cabinet
Recess
Self-AligningScrew
MicrowaveOvenTop
_ Attach the microwave oven to the top cabinet.
[] Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two flfll turns on
each screw.
I
_ Tighten center
screw completel).
[] Tighten tile outer two screws to tile top of tile
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
tile top cabinet.)
_ Install grease filter. See tile Owner's Manual
packed with the microwaxe.
18