Specification Sheet

JVW5301SJ/EJ/BJ/FJ
GE
®
30" Wall-Mount Pyramid Chimney Hood
Specification Revised 11/19
Listed by
Underwriters
Laboratories
For answers to your GE Profile
™
Series or GE Appliances product questions, visit our
website at geappliances.com or call GE Answer Center
®
Service, 800.626.2000.
30" models require a 30"-wide opening
*The supplied duct cover fits 7'-4" to 9'-0" ceiling heights
(10' with optional high ceiling kit JXDC72)
The vent hood must be installed 24" min. above the cooking surface. For optimal performance,
installing the hood more than 38" above the cooking surface is not recommended. The hood
installation height above the cooking surface depends upon ceiling height. The telescopic duct
cover conceals the ductwork running fromnthe top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest part
of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be
installed for recirculating operation. Parts for recirculating operation are supplied with the hood.
However, wheninstalled for recirculating operation, the optional charcoal Filter JXCF72 will
need to be purchased separately.
JVW5301SJ_EJ
24" Min
7"
8-1/2"
18-1/2"
30"
*Height
to
Ceiling
9-7/8"
30" models require a 30"-wide opening
*The supplied duct cover fits 7'-4" to 9'-0" ceiling heights
(10' with optional high ceiling kit JXDC72)
The vent hood must be installed 24" min. above the cooking surface. For optimal performance,
installing the hood more than 38" above the cooking surface is not recommended. The hood
installation height above the cooking surface depends upon ceiling height. The telescopic duct
cover conceals the ductwork running fromnthe top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest part
of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be
installed for recirculating operation. Parts for recirculating operation are supplied with the hood.
However, wheninstalled for recirculating operation, the optional charcoal Filter JXCF72 will
need to be purchased separately.
JVW5301SJ_EJ
24" Min
7"
8-1/2"
18-1/2"
30"
*Height
to
Ceiling
9-7/8"
INSTALLATION INFORMATION:
Before installing, consult Use & Care/installation instructions
packed with product for current dimensional data.
OPTIONAL ACCESSORIES
JXDC72SS/ES – 9(ft.) Ceiling Duct Cover Kit
UXDC53SJSS/EJES/BJTS/FJDS – 10(ft.) Ceiling Duct Cover Kit
For 30" distance from counter to hood:
Below 8'-4" ceiling height – no duct cover required
8'-4" – 9'-6" ceiling height – use JXDC72SS/ES/TS/DS
Above 9'-7" ceiling height – use UXDC53SJSS/EJES/BJTS/FJDS
Refer to Installation Instructions for exact specifications
UXRC70 – Remote Control
JXCF72 – Charcoal Filter (needed if used in recirculation mode)
AMP RATING
120V 2.5
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
30" Models Require a
30"-Wide Opening
* The supplied duct cover fits 7'-4"
to 9'-0" ceiling heights (10' with
optional high ceiling kit JXDC72)
30" models require a 30"-wide opening
*The supplied duct cover fits 7'-4" to 9'-0" ceiling heights
(10' with optional high ceiling kit JXDC72)
The vent hood must be installed 24" min. above the cooking surface. For optimal performance,
installing the hood more than 38" above the cooking surface is not recommended. The hood
installation height above the cooking surface depends upon ceiling height. The telescopic duct
cover conceals the ductwork running fromnthe top of the hood to the ceiling.
NOTE: Installation height should be measured from the cooking surface to the lowest part
of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be
installed for recirculating operation. Parts for recirculating operation are supplied with the hood.
However, wheninstalled for recirculating operation, the optional charcoal Filter JXCF72 will
need to be purchased separately.
JVW5301SJ_EJ
24" Min
7"
8-1/2"
18-1/2"
30"
*Height
to
Ceiling
9-7/8"