Installation Instructions TOOLS YOU WILL NEED #1 and #2 Phillips screwdriver Tin snips (for cutting damper, if required) Ruler or tape measure and straight edge Pencil Scissors (to cut template, if necessary) Electric drill with 3⁄16” , 7⁄16”, 3⁄8”, 1⁄2” and 5⁄8” drill bits Gloves Saw (saber, hole or keyhole) Carpenter square (optional) Filler blocks or scrap wood pieces, if needed for top cabinet spacing (used on recessed bottom cabinet installations only) Stud finder or Hammer (optional) Safety
