Installation Instructions for your Microwave Oven Installation Instructions for Cabinet Mounting Accessory Kit Pub. No.
Important Safety Instructions WARNING This mounting Kit is designed for use with microwave ovens: GE Spacemaker IITM, Spacemaker IIITM and Hotpoint CounterSaver® models. Before attempting the installation of this kit, be sure to unplug the oven from wall receptacle. Your oven is designed to be installed under properly constructed, good condition wood or metal cabinets that are sturdy enough to support the items you have in the cabinet, plus an additional 90 pounds from the cabinet bottom.
Two Mounting Methods There are two mounting methods described in this booklet that can be used. 1. Countertop Method You can use this method if you decide not to cabinet mount your oven. To use your oven as a countertop model, simply position the oven on the desired counter and plug the electrical cord into the three prong (grounded) wall receptacle. (Fig. 1) CABINET (SIDE VIEW) 2. Cabinet Mounting Method This method is for mounting your oven under a cabinet (Fig.
Cabinet Mounting Method Preparations Select the correct template (see template/rear bracket reference sheet.) Open the template and detach both segments along the dashed lines with scissors. You should have two separate pieces. (Fig. 7) • Template 1 • Template 2. Make sure you use the template properly depending whether you drill holes from the inside or bottom side of the cabinet. (Fig. 7) FIG. 7 2.
Cabinet Mounting Method (cont.) • Attach Template 1 to rear of cabinet and align arrow with hole center line on Template 2. (Fig. 11) FIG. 11 2. Drill through Template 2 at the four black drilling holes indicated on the template. (Drill should be held straight to ensure proper alignment of bolts.) FIG. 14 3. After drilling the four holes, remove the template and clean the drilled holes. ***Important*** Selecting Your Mounting Bolts 1.
Part No. 350A4502P534 Pub No.
