Installation Guide

Installation
Instructions
Range Trim Kit
JXFILLR1BB, JXFILLR1SS, JXFILLR1DD
INSTALLATION INSTRUCTIONS
If your range is to be installed against a wall, only
parts 1 and 2 are recommended.
If your range is to be installed in an island
configuration, parts 1,2, and 3 are recommended.
Parts 4 and 5 can be used in place of parts 1 and 2,
but modifications may need to be completed by the
customer for an ideal fit.
1. In order to securely install the trim kit, countertop
surfaces around the range must be clean and dry.
2. Adjust the range height so that the top of the
cooktop is 3/8” higher than the countertop and
level. See range installation instructions on how to
adjust unit height.
PARTS INCLUDED
SIDE TRIM REFERENCE GEOMETRY
If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737)
or visit our website at: GEAppliances.com.
31-11118 07-17 GEA
Left Side Trim (1)
Longer Left Side Trim (4)
Front of Side Trims Back of Side Trim Piece
Longer Right Side Trim (5)
*Unless part 4 & 5 are needed, which may have to be cut to size
Optional Trim Parts
No tools required*
Rear Trim (3)
Right Side Trim (2)
Angled Front Surface
Flat Surface Against Range
Cooktop
Countertop
3/8”