Brochure
Feature suite for
every application
Standard product customizable with
pre-engineered options including, but
not limited to:
• Redundant pump for cooling
• Customizable process control
• DB chopper
• Communication protocols
• Harsh environment packaging
• Vibration and shock reinforcement
• Marine-class package
• Up and down synchronous transfer
Motor friendly
• Suited for synchronous induction
and permanent magnet motors
• Output waveforms reduce motor
losses
• Reduced motor noise and vibration
• No significant motor shaft torque
pulsations
• Wide speed range with a consistent
response
MV7000 — À la carte option packaging
Incoming power dip
ride-through
The MV7000 provides incoming power
loss ride-through and keeps the
process running without tripping.
Under-voltage operation
The MV7000 operates continuously
and provides power to the motor at
a lower input supply voltage (down
to 70% of nominal voltage).
Flying start into a
spinning load
The MV7000 offers the ability to
catch and take control of a spinning
load without any damaging torque,
voltage or current impacting the
equipment if started while the load
is already spinning.
Critical speed avoidance
The MV7000 can be programmed for
up to three critical frequency bands
and ride-through these without any
resonance issues.
Independent acceleration
and deceleration ramps
The MV7000 can be be programmed
into the drive controls as needed for
controlled starting and stopping of
the load.
Process control benefits
High performance control
11GE I MV700010 GE I MV7000