Specification

For answers to your Monogram, Café™, GE Profile™ or GE Appliances product questions,
visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Specification Revised 4/24
All GE Appliances ranges are
equipped with an Anti-Tip device.
The installation of this device is
an important, required step in the
installation of the range.
PB900YV
GE Profile
™
30" Smart Free-Standing Electric Convection
Fingerprint Resistant Range with No Preheat Air Fry
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
RECEPTACLE LOCATIONS: Locally approved flexible
service cord or conduit must be used because terminals
are not accessible after range installation. See shaded
area in drawing for location of electrical outlet box.
Recommended outlet locations allow range to be installed
directly against wall.
NOTE: This appliance has been approved for 0" spacing
to adjacent surfaces above the cooktop. However, a 6"
minimum spacing to surfaces less than 15" above the
cooktop and adjacent cabinet is recommended to reduce
exposure to steam, grease splatter and heat.
INSTALLATION INFORMATION: Before installing,
consult installation instructions for current
dimensional data and additional requirements.
†
NOTE: Check local codes for required breaker size.
KW RATING
240V 13.3
208V 10.2
BREAKER SIZE
240V 40 Amps
†
208V 40 Amps
†
30"
12 1/4"
Install the
outlet box
on either
side of the C
L
36 1/4"
49"
30"
3"
3"
3"
9"
8"
4"
2 1/4"
7 1/2"
2 1/4"
Recommended
acceptable
electrical outlet
area. Orient the
electrical receptacle
so the length is
parallel to the oor.
28 3/4"
with handle
26"
w/o handle