Dimensions Guide

For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 5/20
All GE Appliances ranges are equipped
with an Anti-Tip device. The installation
of this device is an important, required
step in the installation of the range.
PB935YP/BP
GE Profile
™
30" Smart Free-Standing Electric Convection Range
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
RECEPTACLE LOCATIONS: Locally approved flexible
service cord or conduit must be used because terminals
are not accessible after range installation. See shaded
area in drawing for location of electrical outlet box.
Recommended outlet locations allow range to be installed
directly against wall.
NOTE: This appliance has been approved for 0" spacing
to adjacent surfaces above the cooktop. However, a 6"
minimum spacing to surfaces less than 15" above the
cooktop and adjacent cabinet is recommended to reduce
exposure to steam, grease splatter and heat.
INSTALLATION INFORMATION : Before installing,
consult installation instructions for current dimensional
data and additional requirements.
30"
25"
2-1/2"
2-1/2"
6-1/2"
29-7/8"
47"
11"
35-3/4"
to
36-1/2"
w/o handle
w/handle
47-7/8"
28"
25-3/8"
ACCEPTABLE ELECTRICAL
OUTLET AREA
PB935SPSS
PB935BPTS
30
" FREE-STANDING ELECTRIC
SINGLE OVEN
†
NOTE: Check local codes for required breaker size.
KW RATING
240V 12.1
208V 9.1
BREAKER SIZE
240V 40 Amps
†
208V 40 Amps
†