Installation guide

(_ Installation Guide - Software Update Module for the GE Refrigerator : WR98R10237

Listed below are the installation instructions to update the software on your GE Appliance.

This software update should improve the sound performance of your refrigerator.

Parts Needed:

• Software Update Module

• Connector cable

Software Update Module

Connector Cable

Instructions:

1)The Refrigerator needs to be plugged in and operating before updating the software.

21Remove the rubber grommet from the input jack if present. Connect one end of the cable to

the input jack on top of the GE Refrigerator Isee picturel.

Refrigerotor connection

PAGE 1
(_ Installation Listed below are the installation This software Parts • • Guide - Software update should Update Module for the GE Refrigerator instructions improve to update the sound the software performance on your of your : WR98R10237 GE Appliance. refrigerator.
PAGE 2
3) Connectthe other end of the Cableto the Software Update Module. The software transfer will begin automatically once the module is connected to the appliance. When the software update starts, your refrigerator will shut down. Orange LED Green LED LED's on Module Connect cable 4) The Software Update Module has a green LED light and an orange LED light (see picture).
PAGE 3
(_ Installation Guide - Software Update Module for the GE Refrigerator : WR98R10237 Listed below are the installation This software Parts • • update should instructions improve to update the sound the software performance on your of your GE Appliance. refrigerator.
PAGE 4
3) Connectthe other end of the Cableto the Software Update Module. The software transfer will begin automatically once the module is connected to the appliance. When the software update starts, your refrigerator will shut down. Orange LED Green LED LED's on Module Connect cable 4) The Software Update Module has a green LED light and an orange LED light (see picture).