Specification

ManualsBrandsGE ManualsAppliancesProfile 30 in. Gas Downdraft Cooktop in Stainless Steel with 4 Burners

PGP9830SR

GE Profile

™

Series 30" Downdraft Gas Cooktop

For answers to your Monogram, GE Café

™

Series, GE Profile

™

Series or

GE Appliances product questions, visit our website at geappliances.com

or call GE Answer Center

Service, 800.626.2000.

Specification Revised 8/22

*NOTE: A 5" minimum spacing to adjacent side wall is required

Dimension and installation information are shown in inches.

WALL INSTALLATION: Wall installations

require 25" countertop depth. When

cabinet is flush against the wall, the fan

housing can be rotated to the horizontal

position for direct venting through

rear wall. Make a countertop cutout

in the range cabinet according to unit

dimensions and installation type. Duct

hole is positioned in back of cabinet for

through-the-wall ducting.

PENINSULA OR ISLAND INSTALLATION:

For peninsula/islands a minimum 26"

countertop depth is suggested. Blower

should be in vertical position. Island

or peninsula cabinets may require

adjustment in cutout depth and/or

location within the width dimensions. Duct

hole is positioned in bottom of cabinet for

island or peninsula installation.

SLAB INSTALLATION: For peninsula or

island installation and rear wall ducting,

6" PVC duct or locally approved piping

should be used if installing under a

poured concrete slab.

INSTALLATION INFORMATION: Before

installing, consult installation instructions,

packed with product, for current

dimensional data.

NOTE: These cooktops are approved for

indoor use only.

DIMENSIONS AND INSTALLATION INFORMATION

*U.L. Requirement

Note: A 5" minimum spacing to adjacent side wall is required

29-3/4"

(29-13/16" SS)

28-3/4"

21-7/8"

(21-15/16" SS)

2-3/16"

(2-1/4" SS)

22"

20-1/2"

11-1/2"

20-5/8"

28-7/8"

25"

1-7/8"

MIN. Required*

Cut-out Dimensions (in inches)