Specification

For answers to your Monogram, GE Café
™
, GE Profile
™
or GE Appliances
product questions, visit our website at geappliances.com or call
GE Answer Center
®
Service, 800.626.2000.
Specification Revised 6/20
PGS930YP/BP
GE Profile
™
30" Smart Slide-In Front-Control Gas Fingerprint Resistant Range
NOTE: Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should be placed
to avoid interference with the handle.
NOTE: Cabinets installed adjacent to slide-in ranges must
have an adhesion spec of at least 194° temperature rating.
INSTALLATION INFORMATION: Before installing,
consult installation instructions packed with product for
current dimensional data.
For all installations, install the required rear trim to
back of range with 4 screws provided.
36 1/4"
+/- 1/4"
29 7/8"
26 7/8"
w/o handle
29 1/2"
w/handle
47 1/2"
1 1/8"
30" min
See note A
Note A: 30" Minimum to bare cabinet, see
installation instructions heights less than 30"
18"
minimum
to cabinets
above counter
6" right side
6" left side
minimum
to side wall
0"
minimum
to cabinets
below
cooktop
16"
max to
cabinets
above
counter
36"
12 1/2"
5"
2"
13"
9"
4 1/2"
4"
30"
Side Wall
supply
electrical
and
Gas
14 1/2"
30"
24"
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
PGS930_JGS760
36 1/4"
+/- 1/4"
29 7/8"
26 7/8"
w/o handle
29 1/2"
w/handle
47 1/2"
1 1/8"
30" min
See note A
Note A: 30" Minimum to bare cabinet, see
installation instructions heights less than 30"
18"
minimum
to cabinets
above counter
6" right side
6" left side
minimum
to side wall
0"
minimum
to cabinets
below
cooktop
16"
max to
cabinets
above
counter
36"
12 1/2"
5"
2"
13"
9"
4 1/2"
4"
30"
Side Wall
supply
electrical
and
Gas
14 1/2"
30"
24"
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
PGS930_JGS760
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
ADA
COMPLIANT