Specification

PGS960BEL/EEL/SEL
GE Profile
Series 30" Slide-In Front Control Gas Double Oven Convection Range
For answers to your Monogram, GE Café
Series, GE Profile
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 6/17
NOTE: Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should be placed
to avoid interference with the handle.
NOTE: Cabinets installed adjacent to slide-in ranges must
have an adhesion spec of at least 194° temperature rating.
INSTALLATION INFORMATION: Before installing,
consult installation instructions packed with product for
current dimensional data.
For all installations, install the required rear trim to back of
range with 4 screws provided.
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
ADA
COMPLIANT
36 1/4"
+/- 1/4"
29 1/2"
w/handle
*43 7/8"
30"
*Dimensions are referenced from the point at the
back of the range that will contact the rear wall first.
*Dimension are referenced from the point at
the back of the range that will contact the rear
wall first. Max dimension should be considered
between the upper and lower doors.
**Height to backguard based on Café style
backguard kit installed.
26 7/8"
w/o handle
1 1/8"
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
Side Wall
Gas
and
electrical
supply
30"
16"
max to
cabinets
above
counter
6" right side
6" left side
minimum
to side wall
36"
30"
2"
4"
9"
13"
5"
4 1/2"
18"
minimum
to cabinet
above counter
0"
minimum
to cabinets
below
cooktop
24"
30"
min
14 1/2"
12 1/2"
36 1/4"
+/- 1/4"
29 1/2"
w/handle
*43 7/8"
30"
*Dimensions are referenced from the point at the
back of the range that will contact the rear wall first.
*Dimension are referenced from the point at
the back of the range that will contact the rear
wall first. Max dimension should be considered
between the upper and lower doors.
**Height to backguard based on Café style
backguard kit installed.
26 7/8"
w/o handle
1 1/8"
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
Side Wall
Gas
and
electrical
supply
30"
16"
max to
cabinets
above
counter
6" right side
6" left side
minimum
to side wall
36"
30"
2"
4"
9"
13"
5"
4 1/2"
18"
minimum
to cabinet
above counter
0"
minimum
to cabinets
below
cooktop
24"
30"
min
14 1/2"
12 1/2"
36 1/4"
+/- 1/4"
29 1/2"
w/handle
*43 7/8"
30"
*Dimensions are referenced from the point at the
back of the range that will contact the rear wall first.
*Dimension are referenced from the point at
the back of the range that will contact the rear
wall first. Max dimension should be considered
between the upper and lower doors.
**Height to backguard based on Café style
backguard kit installed.
26 7/8"
w/o handle
1 1/8"
GAS PIPE AND ELECTRICAL OUTLET LOCATIONS
Side Wall
Gas
and
electrical
supply
30"
16"
max to
cabinets
above
counter
6" right side
6" left side
minimum
to side wall
36"
30"
2"
4"
9"
13"
5"
4 1/2"
18"
minimum
to cabinet
above counter
0"
minimum
to cabinets
below
cooktop
24"
30"
min
14 1/2"
12 1/2"

Summary of content (2 pages)