Installation guide

Installati
instructions
Built-ln Wall Oven
27" (68.6 cm) models
JKSI0, JKP30, JKP35, JKP55, JKP70, JKP75,
PK916, PK956, ZEK938, ZEK958
30" (76.2 cm) models
JTP30, JTP35, JTP55, JTP70, JTP75, PT916,
PT920, PT956, PT960, ZET938, ZET958
if you have questions, call 1.800.GE.CARES or visit our website at:
ge.com
Before You Begi n Proper installationistheresponsibility
of the installer and product failure due
Read these instructions carefully and completely.
IMPORTANT-save these
instructions for local inspector's use.
IMPORTANT-obse_,e all
governing codes and ordinances.
Note to InstallermBe sure to leave these
instructions with the consumer.
Note to ConsumermKeep these
instructions for future reference.
to improper installation is NOT covered
under warranty.
NOTE=This appliance must be properly
grounded.
ATTENTION INSTALLER
All electric wall ovens must be hard wired
(direct wired) into an approved junction
box. A plug and receptacle is NOT permitted
on these products.
Parts Included
(Appearance will vary)
Screws For Installation
(8-18 x .750 flat head
Phillips wood screws)
27" (68.6 cm)
Metal Bottom Trim
(68.6 cm)
Metal Bottom
Trim Assembly
(on some models or
can be purchased
separately)
30" (76.2 cm)
Metal Bottom Trim
Assembly
Materials Needed
__ _ WireNu_ts
Strain Relief Clamp Junction
for 1/2" conduit Box _k_ _
36" (91 cm)
of String
Tools Needed
1/8" (3 mm) Drill Bit and
Electric or Hand Drill
Phillips
Screwdriver
31-10647-2 07-07 JR

Summary of content (20 pages)