Installation and Operation

49-60466-3 11
Installation Instructions
TOOLS REQUIRED
• #2 Phillips screwdriver
• Adjustable wrench
PARTS SUPPLIED
• Hardware for changing door swing
• Left and right side hinge covers
• Top screw hole cover
STAINING WOOD DRAWER
FRONTS
The drawer fronts are unfinished beech wood.
During use, oil from hands may accumulate and
stain the wood.
• The drawer fronts may be stained and sealed to
match adjacent cabinetry. The tinted glass will
make the stained wood appear darker. A true
color match can be seen only when the door is
opened.
• Apply the stain and sealer according to the
manufacturer’s instructions. To avoid unpleasant
odor, keep the door open to ventilate and allow
the stain/sealer to dry completely before using
the product.
1
REMOVE PACKAGING
• Remove corner blocks and foam drawer stops.
• Remove all packing material, tape and protective
plastic coverings.
CAUTION
Small objects are a choke hazard
for children. Remove and discard any parts not
used.
GROUNDING THE BEVERAGE
CENTER AND WINE CHILLER
FOR PERSONAL SAFETY, THIS APPLIANCE
MUST BE PROPERLY GROUNDED.
The power cord of this appliance is equipped with
a three-prong (grounding) plug which mates with a
standard three-prong (grounding) wall receptacle
to minimize the possibility of electric shock hazard
from this appliance.
Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is
properly grounded.
Where a standard 2-prong wall outlet is
encountered, it is your personal responsibility
and obligation to have it replaced with a properly
grounded 3-prong wall outlet.
DO NOT, UNDER ANY
CIRCUMSTANCES, CUT
OR REMOVE THE THIRD
(GROUND) PRONG FROM THE
POWER CORD.
DO NOT USE AN ADAPTER
PLUG TO CONNECT THE
REFRIGERATOR TO A
2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD WITH THIS
APPLIANCE.
INSTALLATION INSTRUCTIONS