Installation and Operation

16 49-60466-3
Problem Possible Causes What To Do
Moisture forms on outside
of appliance
Not unusual during periods of
high humidity.
If bothersome, wipe surface dry; otherwise,
moisture will evaporate in time.
Door left open. Always make sure that the door is closed after
opening.
Check to see if a bottle is holding door open.
Frost or moisture collects
inside
Too frequent or too long door
openings.
Appliance will dissipate moisture in time. If
bothersome, wipe surface dry.
In humid weather, air carries
moisture into appliance when
door is opened.
Appliance will dissipate moisture in time. If
bothersome, wipe surface dry.
Temperature control set at
coldest setting.
See Temperature Control section.
Interior light does not
operate
Appliance is unplugged. Push the plug completely into the outlet.
The circuit breaker is tripped /
the fuse is blown.
Replace fuse or reset the breaker.
Light bulb needs replacing. See Care and Cleaning section.
GFI outlet is tripped. Reset outlet.GFI outlet is not recommended.
Hot air from bottom of
appliance
Normal air flow cooling
motor.
In the refrigeration process, it is normal for heat to
be expelled in the area under the appliance. Some
floor coverings are sensitive and will discolor at
these safe and normal temperatures.
Appliance never shuts off
but temperatures
Adaptive defrost keeps
compressor running during
door openings.
This is normal. The appliance will cycle off after the
Normal operation in extreme temperatures.
Troubleshooting tips ... Before you call for service
TROUBLESHOOTING TIPS