Owners manual

GE LINK INSTALL GUIDE 2

CONNECTING THE WINK HUB TO YOUR WI-FI NETWORK

1. Plug the Wink HUB into an AC outlet. It will automatically turn on. Once the

light on the Wink HUB is ﬂashing purple, it is ready to connect.

2. Turn on Bluetooth for your mobile device.

3. Open the Wink app on your mobile device and log in.

4. Tap Add a product.

5. From the product list, tap Wink HUB.

6. A series of steps will follow onscreen. Step 1 is a short video about connecting

the Wink HUB. Tap Next.

7. Step 2 instructs you to plug in your Wink HUB. Tap Next.

8. Step 3 instructs you to SHARE WIFI. Enter your Wi-Fi network name and

password and tap SHARE WIFI.

9. The Wink HUB should ﬂash yellow, meaning it is attempting to connect to

your Wi-Fi network.

10. When the light on the Wink HUB changes to solid blue and the wink app

displays “success,” your device is connected. Tap NAME WINK HUB to give

your hub a name or tap DONE to exit setup.

Note: If the Wink app does not display “success” or the light on the Wink HUB

does not turn solid blue, contact Wink Support at 1 (844) WINKAPP or support@

winkapp.com.

CONNECTING THE GE LINK LIGHT BULB TO THE WINK APP

1. Make sure light switch is off.

2. Twist the GE Link light bulb into the light socket and turn light switch on.

3. Open the Wink app on your mobile device and tap Add a product.

4. From the product list, tap Lights.

5. From the Lights list, tap GE Bulb.

6. A series of steps will follow. Step 1 instructs you to install the light ﬁxture, if

needed. Tap Next.

7. Step 2 instructs you to make sure the Wink HUB is plugged in. Tap Next.

8. Step 3 will let you know when your Wink Hub is ready. Once it is ready, the

pairing will begin. The light bulb will ﬂash slowly as it is connecting.