User Manual

49-2000723 Rev. 0 13
* Compatible Apple or Android devices and home WiFi network required.
USING THE RANGE: Settings
Settings
Wifi Connect (cont.)
4. If the connection light does not turn on or is blinking,
follow the instructions on the app to reconnect. If
issues continue, please call the Connected Call
Center 1.800.220.6899 and ask for assistance
regarding oven wireless connectivity.
To connect additional smart devices, repeat steps 1 and 2.
Note that any changes or modifications to the remote
enable device installed on this oven that are not
expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
REMOTE STARTING YOUR OVEN
To be able to start the oven remotely once connected to
WiFi, press the Remote Enable pad and the icon will
turn on in the display. The oven can now be remotely
started with a connected device. Opening an oven door
or turning off the oven will turn off the icon. The
icon must be lit to start the oven remotely. The icon
is not required to change the oven temperature while it
is running, set a timer or to turn the oven off from the
phone app while the icon shows it is Wifi Connected.
After using the oven, remember to verify that the icon
is lit if you wish to start the oven remotely in the future.
NOTE: )RRGVWKDWVSRLOHDVLO\²VXFKDVPLONHJJVILVK
VWXIILQJVSRXOWU\DQGSRUN²VKRXOGQRWEHDOORZHGWR
sit for more than 1 hour before or after cooking. Room
temperature promotes the growth of harmful bacteria. Be
sure that the oven light is off because heat from the bulb
will speed harmful bacteria growth.
Clock
This setting sets the oven clock time. Press the Settings
pad, select More and then select Set Clock. Follow the
instructions to set the clock. This feature also specifies
how the time of day will be displayed. You can select
a standard 12-hour clock (12H), 24-hour military time
display (24H), or no clock displayed (Off). Press the
Settings pad, select Set Clock and select either 12/24
hr or On/Off.
Bluetooth
®
- Chef Connect
This is a pairing feature for use with other compatible
Chef Connect enabled products like an over-the-range
microwave oven or range hood. To pair those products to
the range Press the Settings pad and select Bluetooth
®
.
Select Pair and follow the corresponding instructions
included with the mating Chef Connect enabled product.
The range will cancel pairing mode after two minutes if
no mating device is detected. Select Remove to confirm
product is paired or to un-pair from range.
Auto Conv (Auto Conversion)
When using Convection Bake cooking, Auto Recipe
Conversion will automatically convert the regular baking
temperatures entered to convection bake cooking
temperatures when turned on. Note that this option does
not convert convection bake cooking times, it only converts
temperatures. This feature may be turned On or Off.
Press
the Settings pad, select More and then select
Auto
Conversion. Follow the prompts to turn this feature on or
off.
Auto Off
This feature shuts the oven down after 12 hours of
continuous operation. It may be enabled or disabled.
Select Settings, More, and Auto Off to turn this feature
on or off.
Sound
You can adjust the volume and type of alert your appliance
uses. Select Settings, More, and Sound. Follow prompts
for making volume adjustments or for changing between
continuous and single alert tones. A continuous setting will
continue to sound a tone until a button on the control is
pressed. The oven tone volume can be adjusted between
several settings and off. The control will sound the oven
tone at the new volume level each time the sound level is
changed.
F/C (Fahrenheit or Celsius)
The oven control is set to use Fahrenheit temperatures
(F), but you can change it to use Celsius temperatures
(C). Select Settings, More, and F/C to alter between
temperature scales displayed.
Adjust the Oven temperature
This feature allows the oven cooking modes to be
DGMXVWHGXSWR)KRWWHURUGRZQWR)FRROHU8VH
this feature if you believe your oven temperature is too
hot or too cold and wish to change it. This adjustment
affects Bake and Convection Bake modes. No other
cooking modes are affected. Press the Settings pad,
select More and then select Oven Adjust to add More
Heat or Less Heat. Press Save.
Oven Info
To display the model number and software version on
your unit, select Settings, More, and Oven Info.