Installation guide

InstallationInstructions
Pre-lnstallation Checklist
ALL INSTALLATION INFORMATION ON THE
FOLLOWING PAGES ISTO BE USED FOR Ill
SINGLE DOUBLE WALL OVEN INSTALLATION! III
Remove packaging materials.
Check behind hinges and under
elements. Remove labels on the
outside of the door, plastic on trims
and panel, all tape around the oven.
Upper Door
DO not remove
during installation
Lower Door
Removal not
required for
installation
IDDDD Drrrl
_D_DD_ D
Flat Rack with Handles
Fiat Rock without Handles
Offset Rack without Handles
Teom?eerature LpJtce_atu re
Rock Supportswith Hex Nuts
Open oven door and remove literature
pack and oven racks.
Remove Installation Instructions from
literature pack and read them carefully
before you begin.
Be sure to place all literature, Owner's
Manual, Installations, etc. in a safe place
for future reference.
Upper door should not be removed during
installation.
Lower door removal is not recommended.
If required, see removal and installation
instructions in appendix.
Place the oven on a table or platform even
with the cutout opening. Platform must
support 200 Ibs. (91 Kg).
Remove the bottom trim from the top of
the oven. The trim is wrapped separately
and taped to the top of the unit. It will be
installed before unit is pushed fully into the
cabinet, 4" out from cabinet