Specification

PTD7000BN/FN/SN
GE Profile
™
30" Smart Built-In Convection Double Wall Oven
with Air Fry and Precision Cooking
For answers to your GE Profile
™
or GE Appliances
product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 1/22
NOTE: 30" Double electric wall ovens are approved
for installation above 27" and 30" warming drawers.
ATTENTION INSTALLER: Electric wall ovens
are NOT approved for installation with a plug
and receptacle. They must be hard wired into an
approved junction box.
IMPORTANT: Before installing, consult installation
instructions packed with ALL products for current
dimensional and combination data.
WHEN TO USE THE PEDESTAL RAILS: When
replacing an older GE Appliances 30" double wall
oven with a new GE Appliances model. Cutout
Height = 51-13/16" to 51-15/16". This is our
traditional cutout height.
WHEN NOT TO USE THE PEDESTAL RAILS:
When replacing a 30" double wall oven from another
manufacturer (ie; Whirlpool) with a new
GE Appliances model. Cutout height = 50-1/4". You
will need to verify that the existing cutout matches
the 50-1/4" dimension.
If the new GE Appliances 30" double wall oven
is being installed into new construction (ie; not a
replacement), then the recommended installation
is to use the pedestal rails.
Flanges toward
center of cutout
Top cutout
toward front
Attachment
screws
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)