Owner's Manual

About the other features.
Settings
Settings allow to change the default settings of
your OTR.
1
Press the Settings pad. “SELECT SETTING
ITEM 1 - BEEPER VOLUME, 2 - CLOCK MODE,
3 - DISPLAY ON/OFF, 4 - LIGHT SYNC, 5 -
VENT FAN SYNC, 6 - SYNC AUTO OFF,
or 7 - EXIT” will scroll and repeat on display.
2
Select the item to change the settings. See
below tables for detail Guide
24
Settings
Code
Entry
Items for setting Level Entry
1 Beeper Volume 0 - Mute
1 - Low
2 - Normal
3 - Loud
Default is normal
2 Clock Mode 0 - 12 hours
1 - 24 hours
Default is 12 hours
3 Display
2Q2Ⱥ
2Ⱥ
1 - On
Default is On
4 Light Sync - Selects the light level at which the
surface lights will automatically turn on when
SDLUHGUDQJH·VEXUQHULVWXUQHGRQ6HOHFW´2Ⱥµ
to disable this feature. Surface light will turn on
manually.
2Ⱥ
1 - Low
2 - High
Default is High
5 Vent Fan Sync - Selects the fan speed at which
the vent fan will automotically turn on when
SDLUHGUDQJH·VEXUQHULVWXUQHGRQ6HOHFW´2ȺµWR
disable this feature. Vent fan will turn on manu-
ally.
2Ⱥ
1 - Low
2 - Medium
3 - High
4 - Boost
Default is OFF
6 6\QF$XWR2Ⱥ:KHQWKH/LJKW9HQWIDQV\QF
mode is enabled (ON), this will automatically
turn OFF the light/fan when the range burner
KDVEHHQWXUQHGRȺ6HOHFWWKHSHULRGRIWLPH
the light/fan will remain on until the microwave
DXWRPDWLFDOO\WXUQVLWRȺ
0 - 0 minutes
1 - 5 mintues
2 - 10 minutes
3 - 15 minutes
4 - Manual
Default is 15 minutes
7 Settings Exit 1 - Exit