Installation guide

Installation Instructions

INSTALLING THE CHARCOAL

FILTER

[_ Remove 2 screws on top of oven, just above

the grille panel, using a Phillips screwdriver.

[_ Open the door.

[_ Remove the grille. Slide the grille to the left then pull

out.

Screws

[_ Insert the filter into the oven us shown until it fits

squarely into place. It will rest at an angle behind

the front lower tabs. When properly installed,

the wire mesh of the filter should be visible

from the front.

lower tabs

Charcoal filter

[_ Replace the grille and the 2 top screws.

[_ Close the door and replace left side screw.