Installation Guide

Maximum LED Driver Loading Specications
Wiring Multiple LED Lights
Black
(line)
White
(neutral)
Mains InLED driver
LED Light
LED Light
LED Light
LED Driver Loading Specications
Any combination of RH30 LED Lights may be loaded onto a power supply following these guidelines.
• Add up total planned LED load watts per table below.
• For efcient operation, load power supply to minimum of 43% of power supply wattage rating.
.43 <
total LED load watts
< 1.00
power supply rated watts
DC Watts*
LED Driver 50 Watt
GEPS6500NCMUL-SY
LED Driver 100 Watt
GEPS6000NCMUL-SY,
GEPS24-100UGL-IP,
GEPS6100NCCON-SY
RH30 Canopy 4 ft.
23
2 LED Lights 4 LED Lights
RH30 Canopy 3 ft.
17
3 LED Lights 5 LED Lights
RH30 Canopy 2 ft.
12
4 LED Lights 8 LED Lights
RH30 Canopy 1 ft.
6
8 LED Lights 16 LED Lights
RH30 Undershelf 4 ft.
8
6 LED Lights 12 LED Lights
RH30 Undershelf 3 ft.
6
8 LED Lights 16 LED Lights
RH30 Undershelf 2 ft.
4
12 LED Lights 24 LED Lights
RH30 Undershelf 1 ft.
2
24 LED Lights 48 LED Lights
WARNING/AVERTISSEMENT
Risk of electrical shock. Ensure that all connection points are sealed for damp location using the appropriate method per
the NEC or local electrical code. Risque de choc électrique. S’assurer que les points de raccordements sont scellés pour
emplacement humide en employant une méthode permise par le NEC ou par le code électrique local.
CAUTION/ATTENTION
Risk of injury. Do not overload LED Driver. Do not exceed limits shown in “Maximum LED Driver Loading” table below. Risque
de blessure. Ne pas surcharger l'alimentation. Ne pas exéder les limites de la table ci-dessous: “Charges maximales pour les
alimentations.”
* For typical in-situ DC power and actual system power consumption (AC Watts) see RH30 product technical guide.