Brochure

Industrial X-ray Tubes & Generators

160-300kV portable and 160-450kV stationary

equipment with directional or panoramic tubes and

dierent combinations of focal-spot sizes provide

the appropriate X-ray source to meet your specic

requirements. In addition, we oer a complete line of

micro- and nanofocus X-ray generators and tubes.

3D Computed Tomography (CT)

3D computed tomography machines are laboratory

instruments and can be applied to many materials

engineering and failure analysis applications. "Point

cloud" data from 3D scans can be measured very ac-

curately and sliced with software imaging tools.

Corrosion & Erosion

Field portable ERESCO X-ray generators are used for a wide variety

of lm, CR and DR corrosion detection and sizing applications.

A CT scan of a medium-sized furnace tube helps to analyze the

failure's root cause.

Rhythm

Software

Rhythm can acquire image data from CR and DR

sources or from lm digitizers. This data can be

displayed on the monitor of a standard PC. Rhythm

oers standardized reporting capability in easy-to-

understand formats, with DICONDE-tagged images.

This allows fast historical and meaningful comparison

of reports from dierent inspectors.

Flash! Filters™ for welds provides one-click image optimization,

improving the speed and accuracy of defect detection and sizing

by using the Wall Thickness Measurement Tool (WTMT) software.