94948 Revised Size 1/21/02 2/25/02 4:28 PM RM94948 Universal Remote Control INSTRUCTION MANUAL Page 1
94948 Revised Size 1/21/02 2/25/02 4:28 PM Table of Contents Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Setting Up Your Universal Remote . . . . . . . . . . . . . . . .3 Programming Your Universal Remote For: TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 VCR or DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7 Cable Box or Other Device . . . . . . . . . . . . . . . . . .7-8 Operating A TV . . . . . . . . . . . . . . . .
94948 Revised Size 1/21/02 Button Description Indicator Light Flashes to show that the remote is working. POWER Operates the same as on your original remote. Device Buttons(TV, VCR/DVD, CBL/AUX) The TV, VCR/DVD, and CBL/AUX buttons are used to select the home entertainment device you want to control. MUTE Operates the same as on your original remote. VOLUME and CHANNEL Operate the same as on your original remote. These buttons are also used to enter the code for your device.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Setting Up Your Universal Remote Place batteries in the remote 1. Remove the battery compartment cover. 2. Place two AAAbatteries as shown, matching the + and – end of each battery as indicated in the battery compartment. 3. Replace the cover. Determine if your remote needs programming (Some RCA, GE and ProScan devices may already be pre-programmed. ) 1. Press the button of the device you want to control (for example TV). 2.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Programming TV Using Code Lists 1. Manually turn on the TV. 2.Find the code for your brand in the list starting below. 3.Press and hold the TV button for five (5) seconds, the Indicator Light will light up. 4.Release the TV button. The following buttons stand for each digit of the code: 1st Digit 2nd Digit 5.Enter the first digit in the code with the REV button. Example: if the first number is 3, depress the REV button three times.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Programming TV Using Code Lists (con’t) 7.Enter the third digit in the code with the FOR button the same way as in step 5. If the number is 0, do not press FOR and proceed to next step. 3 RD CODE X NUMBER 8.Press STOP after code is entered and the Indicator Light will turn off. 9. With your TV on, press CHANNEL Up. If the TV responds, no further programming is required. 10.Enter your code here for easy reference.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Programming VCR or DVD Player Using Code Lists (con’t.) The following buttons stand for each digit of the code: 1st Digit 2nd Digit 5.Enter the first digit in the code with the REV button. Example: if the first number is 3, depress the REV button three times. If the number is 0, do not press REV and proceed to next step. 3rd Digit X 1ST CODE NUMBER X 2 ND CODE NUMBER X 3RD CODE NUMBER Note: The Indicator Light will blink after each number is entered.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Programming VCR or DVD Player Using Code Lists (con’t.) 9. With your VCR or DVD player on, press CHANNEL Up. If the VCR or DVD player responds, no further programming is required. VCR/DVD CODE 10. Enter your code here for easy reference. Programming Cable Box Using Code Lists 1. Manually turn on the Cable Box. 2.Find the code for your brand in the list starting on the next page. 3.
4948 Revised Size 1/21/02 2/25/02 4:28 PM Programming Cable Box Using Code Lists Note: The Indicator Light will blink after each number is entered. 6.Enter the second digit in the code with the PLAY button the same way as in step 5. If the number is 0, do not press PLAY and proceed to next step. 7.Enter the third digit in the code with the FOR button the same way as in step 5. If the number is 0, do not press FOR and proceed to next step. X 2ND CODE NUMBER X 3RD CODE NUMBER 8.
94948 Revised Size 1/21/02 2/25/02 Operating A TV Turning the TV On and Off. 1. Press TV to set the remote to control the TV (most RCA, GE and ProScan models will only turn on when pressing TV not power). 2. Press POWER to turn the TV on or off. Change Channels and Volume on the TV. Press VOLUME UP or VOLUME DOWN to change volume on the TV. Press CHANNEL UP or CHANNEL DOWN to change channels on the TV. Operating A Cable Box Turning the Cable Box On or Off. 1.
94948 Revised Size 1/21/02 2/25/02 Operating A DVD Player Turning the DVD Player On and Off. 1. Point the remote at the DVD player and press VCR/DVD. 2. Press POWER to turn the DVD player on or off. 3. Press CHANNEL UP or CHANNEL DOWN for DVD SKIP functions. 4. Use REV and FOR for DVD reverse and forward functions. Operating A VCR Turning the VCR On or Off. 1. Press VCR/DVD to set the remote to control the VCR. (Most RCA, GE and ProScan models will only turn on when pressing VCR/DVD not POWER.) 2.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Operating A VCR (con’t) 4. Press STOP when you are finished. 5. Press REW to rewind the tape. 6. Press PAUSE to pause the tape. 7. Press RECORD twice to begin recording. Programming Using Code Search If your TV, VCR or Cable Box does not respond to your remote after you have tried all the codes for your brand, try searching for your code. Program a device button using Code Search. 1. Manually turn on your TV, VCR or Cable Box. 2.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Code Retrieval If you need to find the three digit code after you have set up your remote, use this procedure. 1. Press the Device button (TV, VCR/DVD or CBL/AUX) for five (5) seconds. The Indicator Light will go on. Then release the device button. 2. Then press the Device button (TV, VCR/DVD or CBL/AUX) again. The Indicator Light will go off. Release the device button. ON OFF 3.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Operating A TV/VCR Combo Unit Some TV/VCR combination units may be controlled by using a combination of TV and VCR codes. For example, the Samsung TV/VCR combo unit may be controlled by both the Samsung TV code and the Samsung VCR code. GE, RCA and ProScan Brand Devices: Many of these devices (TVs and VCRs) do not need to be programmed. In the event that programming is required, the code search method is suggested.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Additional Electronic Products For additional electronic products, check out our web site at www.ge-electronics.com. Lost Your Codes? Enclosed with this remote is a sticker on which you should write the codes for each device you programmed. Apply the sticker to the back of the remote or somewhere convenient for future reference.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Indice Descripción del botón . . . . . . . . . . . .15-16 Arreglo su telecontrol universal . . . .16-17 Programando su TV telecontrol universal para: TV . . . . . . . . . . . . . . . . . . . . . . . .17-19 VCR/DVD . . . . . . . . . . . . . . . . .19-21 El rectángulo del cable/AUX . . . .21-23 Funcionamiento del TV . . . . . . . . . . . .23 Funcionamiento del rectángulo del cable . . .24 Funcionamiento del VCR . . . . . .24-25 Programando su búsqueda del código .
94948 Revised Size 1/21/02 2/25/02 4:28 PM VOLUME and CHANNEL Funcione igual que en su telecontrol original. Estos botones también se utilizan para introducir el código para su dispositivo. Los botones del VCR Los botones de REV (rebobinado), del PLAY, del FOR (delantero rápido), de REC (expediente), STOP, y PAUSE controlan las mismas funciones que ésas encontradas en su telecontrol del VCR. Arreglo su Telecontrol Universal Ponga las baterías en el telecontrol: 1.
94948 Revised Size 1/21/02 2/25/02 4:28 PM 2. Si el dispositivo se gira, presione otro botón para confirmar (por ejemplo canal para arriba). 3. Si el dispositivo que usted seleccionó (TV) responde, usted no necesita programar el telecontrol. Si el dispositivo que usted seleccionó (TV) no responde, usted necesita programar el telecontrol. 4. Relance los pasos de progresión 1-3 para otros dispositivos. Programación del TV usando Listas De Código 1. Gire manualmente la TV. 2.
94948 Revised Size 1/21/02 2/25/02 4:28 PM 4. Versión el botón de la TV. Los botones siguientes están parados para cada dígito del código: 5. Incorpore el primer dígito en el código con el botón de REV. Ejemplo: si el primer número es 3, presione el botón de REV tres veces. Si el número es 0, no presione REV y proceda al paso de progresión siguiente. Nota: La luz de indicador centelleo después de que se incorpore cada número. 6.
94948 Revised Size 1/21/02 2/25/02 4:28 PM 8. Presione STOP después de que se introduzca el código y la luz de indicador darán vuelta apagado. 9. Con su TV encendido, presione CHANNEL para arriba. Si responde la TV, se requiere la programación no adicional. TV CODE 10. Introducza su código aquí para la referencia fácil. Programación su VCR usando Listas De Código 1. Gire manualmente el VCR. 2. Encuentre el código para su marca de fábrica en la lista que comienza abajo. 3.
94948 Revised Size 1/21/02 2/25/02 5. Incorpore el primer dígito en el código con el botón de REV. Ejemplo: si el primer número es 3, presione el botón de REV tres veces. Si el número es 0, no presione REV y proceda al paso de progresión siguiente. Nota: La luz de indicador centelleo después de que se incorpore cada número. 6. Incorpore el segundo dígito en el código con el botón del PLAY la misma manera que en el paso de progresión.
94948 Revised Size 1/21/02 2/25/02 4:28 PM 9. Con su VCR encendido, presione CHANNEL para arriba. Si responde el VCR, se requiere la programación no adicional. VCR/DVD CODE 10. Introducza su código aquí para la referencia fácil. Programación su rectángulo del cable usando Listas De Código 1. Gire manualmente del rectángulo del cable. 2. Encuentre el código para su marca de fábrica en la lista que comienza abajo. 3.
94948 Revised Size 1/21/02 2/25/02 de REV. Ejemplo: si el primer número es 3, presione el botón de REV tres veces. Si el número es 0, no presione REV y proceda al paso de progresión siguiente. Nota: La luz de indicador centelleo después de que se incorpore cada número. 6. Incorpore el segundo dígito en el código con el botón del PLAY la misma manera que en el paso de progresión. Si el número es 0, no presione PLAY y proceda al paso de progresión siguiente. 7.
94948 Revised Size 1/21/02 2/25/02 mación no adicional. 10. Introducza su código aquí para la referencia fácil. CABLE/ OTHER DEVICEBOX CODE Operación de una TV Dando vuelta a la TV por intervalos. 1. Presione la TV para fijar el telecontrol para controlar la TV (la mayoría de los modelos de RCA, de la GE y de ProScan se girarán solamente cuando presiona el botón TV no POWER. 2. Presione POWER para dar vuelta a la TV encendido o apagado. Cambia canales y volumen de off.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Operación de un rectángulo del cable Dando vuelta a el rectángulo del cable por intervalos. 1. Señale el telecontrol en el rectángulo del cable y presione CBL/AUX. 2. Presione POWER para darle vuelta encendido o apagado. Cambia canales en el rectángulo del cable Presione CHANNEL UP o CHANNEL DOWN para cambiar canales en el rectángulo del cable Dando vuelta a el VCR por intervalos. Operación de un VCR 1.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Usar una cinta en su VCR. 1. Gire el VCR. 2. Inserte una cinta en el VCR. 3. Presione PLAY para encender la cinta. 4. Presione STOP cuando le acaban. 5. Presione REV para rebobinar la cinta. 6. Presione PAUSE para detenerse brevemente la cinta. 7. Presione RECORD dos veces para comenzar a registrar.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Programe un botón del dispositivo usando búsqueda del código. 1. Gire manualmente su TV, VCR/DVD o rectángulo del CBL/AUX. 2. Presione el botón del dispositivo (TV, VCR/DVD o CBL/AUX) por cinco (5) segundos. La luz de indicador continuará. Entonces versión el botón del dispositivo. 3. Presione y versión POWER hasta que el dispositivo da vuelta apagado (usted puede tener que relanzar hasta 200 veces en un índice de una vez por segundo). 4.
94948 Revised Size 1/21/02 2/25/02 4:28 PM La Extracción del código Si usted necesita encontrar el código de tres cifras después de que usted haya instalado su telecontrol, utilice este procedimiento. 1. Presione el botón del dispositivo (TV, VCR/DVD o CBL/AUX) por cinco (5) segundos. La luz de indicador continuará. Entonces versión el botón del dispositivo. 2. Entonces presione el botón del dispositivo (TV, VCR/DVD o CBL/AUX) otra vez. La luz de indicador se apagará.
94948 Revised Size 1/21/02 2/25/02 5. Para el tercer dígito en el código, presione el botón del FOR y cuente el número de parpadeos. Nota: si no hay parpadeos, el número es cero. 6. Introduzca sus códigos aquí para la VCR/DVD CODE referencia. 4:28 PM TV CODE CABLE /DEVICE CODE Funcionando una unidad combo de TV/VCR Algúnes unidades del la TV/VCR combinación pueden ser controladas usando una combinación de los códigos de la TV y del VCR.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Alerta Baja De la Batería: Cuando sus baterías son débiles, la luz de indicador centelleo indicándola es hora de cambiar las baterías. Garantía Limitada De 90 Días La compañía de Jasco Products autoriza este producto para estar libre de los defectos de producción por un período de noventa días a partir de la fecha original de la compra del consumidor.
94948 Revised Size 1/21/02 2/25/02 4:28 PM Los productos electrónicos adicionales Para los productos electrónicos adicionales, controle fuera de nuestro Web site en www.ge-electronics.com. ¿Pierda Su Código? Incluida con este telecontrol es una etiqueta engomada en la cual usted debe escribir los códigos para cada dispositivo que usted programó. Aplique la etiqueta engomada a la parte posteriora del telecontrol o en alguna parte conveniente para la referencia futura.
94948 Revised Size 1/21/02 2/25/02 4:28 PM CODE LIST 31 Page 32
94948 Revised Size 1/21/02 2/25/02 4:28 PM CODE LIST 32 Page 33
94948 Revised Size 1/21/02 2/25/02 4:28 PM CODE LIST 33 Page 34
94948 Revised Size 1/21/02 2/25/02 4:28 PM CODE LIST 34 Page 35
94948 Revised Size 1/21/02 2/25/02 CODE LIST 35 4:28 PM Page 36