GE Measurement & Control Nutronik Testing Machines Full Body and Volumetric Inspection of Tubes and Bars ROTA Ultrasonic Testing Machine Series
The ROTA Ultrasonic Testing Machine Series ROTA Systems Product Line GE Sensing & Inspection Technologies supplies the ROTA – systems which, depending on the client’s requirements, can be configured for individual manual, central or motor adjustment, and are notable for highly repeatable results. A probe revolution rate of 6000-8000 rpm provides highest productivity rates.
Product Information ROTA 25 ROTA 40 Design Rotary head with safety interlock and attached motor prepared for mounting on elevating sliding table Speed 400 - 8000 revolutions per minute Product outer diameter range Approx.
Product Information ROTA 45Z ROTA 65Z Design Rotary head with safety interlock and attached motor prepared for mounting on elevating sliding table Speed 300 - 4500 revolutions per minute Product outer diameter range approx.
Product Information ROTA 130S Design ROTA 180S ROTA 280S Rotary head with safety interlock and attached motor prepared for mounting on elevating sliding table particularly designed for testing black, hot produced material API tubes with upset ends can also be tested Equipped with protecting flap with safety locking and with flap for easily cleaning the testing drum and probes. API tubes with upset ends can also be tested.
www.ge-mcs.com GEIT-60018EN (03/12) © 2012 General Electric Company. All Rights Reserved. Specifications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated with GE.
