Operating Manual

www.ge.com/inspectiontechnologies
Light Exit / Light
Guide Socket
Light Intensity
Control Knob
Video Out Port
(Composite)
Power Off
Video In Port
(Camera)
Video Out Port
(S-Video)
Power On
The ELSV-60 Hi-Lux Light Source provides high quality, white light for industrial borescope
and fiberscope inspections. It incorporates a patented and field-proven lamp technology
that has much greater efficiency than halogen or xenon lamps when transferring light into a
small fiber bundle, such as that found in borescopes and fiberscopes. This greater efficiency
allows the lamp to run at only 60W, which then enables a small and lightweight light source
design. The high efficiency also enables the light source to provide high intensity light without
getting very hot, which is an advantage in user safety.
Video inspections are also easy with the ELSV-60. A special video channel makes setup and
operation with our BCAM 1000 C-Mount Camera simple. A single cable connection provides
power to the camera and carries the video signal from the camera back to the light source.
Video outputs carry the signal to a monitor or other video peripheral devices for image
display and/or recording.
System Description
ELSV-60 Light Source 5