Product Brochure

Mill Duty Safety Switches

GE’s Mill Duty safety switches are designed for mill, foundry and industrial applications where safety, high performance and

continuity of service are required. A standard NEMA 12 enclosure protects the interior from dust, lint, fibers, coolants, metal filings

and other non-corrosive contaminants. The stainless steel NEMA 4/4X enclosure additionally shields the interior from hose directed

water, splashing and falling liquids. Interlocks on all enclosure covers assure gasket compression before the switch can be turned ON.

These switches are suitable for use as service entrance equipment when installed in accordance with the National Electric Code.

Mill Duty switches are available in 30-600 amps, 600 Vac, 600 Vdc maximum, fusible and non-fusible units, and in NEMA Type

4/4X (water and dust-tight, corrosion resistant) and Type 12 (drip and dust-tight) enclosures. Horsepower ratings are to UL Listed

maximums. Short circuit ratings are UL Listed to 200,000 rms symmetrical amps when Class J or R fuses are installed.

All GE Mill Duty safety switches carry the following certifications:

• UL Listed and cUL Listed (UL98 Enclosed Switches/CSA-C22.2 No. 4-04)

• Federal Specification WS-865C

• NEMA Enclosed Safety Switch Standard KS1-2013

• Seismic Certified

Features

Highly visible ON/OFF label

Donut handle ideal for hook stick operation

and accepts 3 padlocks in the OFF position

Manual interlock defeat knob permits contact

inspection when switch is OFF

Three or four point mounting brackets

Unobstructed side wiring gutter

Easily removable cover

Spring reinforced fuse clips assure reliable

contact for cool operation. Suitable for Class

H, K, J or R fuses

Equipment ground lugs provided. Lugs

approved for both copper and aluminum wire;

60/75° C rated tang lugs are field convertible

to compression (crimp) connectors

Safety Ease of Installation

and Maintenance