- Panasonic Answering Machine Operating Instructions UF-4000

Journals and Lists
85
Individual Transmission Journal (IND. XMT JOURNAL)
Printout Journals
and Lists
Explanation of Contents
(1) Printout date
(2) Printout time
(3) Journal number
(4) Communication result : "OK" indicates that the communication was successful.
"BUSY" indicates that the communication has failed because of busy
line.
"STOP" indicates that STOP was pressed during communication.
"M-OK" indicates that the substitute reception message in memory was
not printed.
"P-OK" indicates that memory overflow or document misfeeding occurred
while storing the documents into memory for transmission but
successfully stored document(s) was sent.
"3-digit Info Code” (see page 98) indicates that the communication has
failed.
(5) Number of pages transmitted or
received
: The 3-digit number is the number of pages successfully transmitted or
received.
When the documents are stored into memory, two 3-digit numbers will
appear.
The first 3-digit number represents the number of pages successfully
transmitted. The second 3-digit number represents the total number of
pages that were attempted to be transmitted.
Asterisk "*" indicates that the quality of some received copies was poor.
(6) File number : 001 to 999 (If the communication is stored into memory, a file number is
assigned for each communication.)
(7) Duration of communication
(8) Type of communication : "XMT" means Transmission
"RCV" means Reception
"POL" means Polling
"FWD" means Fax Forward
"RMT" means Remote Diagnostic/Firmware Update
(9) Remote station identification : Name : Recorded name in One-Touch or ABBR. Numbers or remote
station's Character ID.
$ number : Dialed telephone number (PIN Code will not be shown)
Number : Remote station's ID number.
(10) Communication date
(11) Communication start time
(12) Diagnostic : For service personnel only
(13) Own LOGO : Up to 25 characters
(14) Own ID number : Up to 20 digits
(15) Own Character ID : Up to 16 characters
(16) Type of communication : Transmission or memory transmission
(17) Destination : If a One-Touch or ABBR was used for the transmission:
One-Touch or ABBR. No./Telephone Number/Recorded Name
If not : Telephone number
(18) Received remote station's ID : Character ID or ID number
(19) Resolution : "STD" means Standard resolution
"FINE" means Fine resolution
"S-FINE" means Super Fine resolution