Data Sheet
LED Lamps for Programmable View Modules
• 5.5inch
Mechanical Outline
Dimensions in inches. (mm) indicates metric equivalent
3"
(76)
5.6"
(142)
1.2"
(30)
Design Compliance
Test Type Compliance
Chromaticity ITE VTCSH-STD Part 2
Moisture Resistance NEMA STD 250 Type 4 - 1991
Mechanical Vibration MIL-STD-883 Method 2007
Electronic Noise FCC Title 47 Sec 15 Sub. B
1
Transient Voltage Protection ITE VTCSH-STD Part 2
Controller Compatibility NEMA TS-2-1992
Operating Specifications
Parameter Rating
Operating Temperature Range -40 to + 74°C (-40 to +165°F)
Operating Voltage Range 80 to 135 V (60Hz AC)
Power Factor (PF) > 90 %
Total Harmonic Distortion (THD) < 20 %
Lens & Shell Material UV Stabilized Polycarbonate
Product Information
AC Power Wavelength Maintained
Model Number Voltage (W) (nm) Intensity
(Cd/m
2
)
----Nominal------- Nominal Dominant Minimum
2
- -
•
DR3-RCFB-01A 120V – 60 Hz 10 626 314
•
DR3-YCFB-01A 120V – 60 Hz 14 589 314
•
DR3-GCFB-01A 120V – 60 Hz 10 508 314
Standard product equipped with spade connectors.
2
Test condition : T
a
= 25°C
1
Class A
Note: To ensure full interoperability, the dimming option and its resistor must be disconnected
before turning on the LED lamp.
3"
(76)
5.6"
(142)
1.2"
(30)
Distributed by:
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2010 GE Lighting Solutions. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
TRAF020-R120110