Specifications Guide

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
UNC15NJII
15" Built-In Gourmet Clear Nugget Ice Maker
Specification Revised 1/16
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
605Dia52
29-1/2"
14-23/32"
3/4"
THICK
CUSTOM
PANEL
The ice machine can be used free-standing or as a
built-in, under the countertop.
The ice machine requires a 115 Volt, 60 Hz., AC only power
supply, with an individual, properly grounded branch circuit,
protected by a 15 amp fuse or circuit breaker.
The ice machine is equipped with a gravity drain to prevent
water from flowing back into the ice storage bin. Although
a floor drain is acceptable, the ideal installation has a
standpipe with a 2" to 1-1/2" pvc drain reducer installed
directly below the outlet of the drain tube.
To achieve a custom appearance, the ice machine door
accepts 3-4" custom panels (using ZIP80SS, stainless steel
panel with Monogram Euro handle, or PIP70SS, stainless
steel panel with GE Profile
™
Series handle) to coordinate or
contrast with cabinetry.
NOTE:
A drain pump is necessary when a floor drain is not available.
Order UPK3 Drain Pump Kit or contact your local plumber
for a recommended pump available in your area.