Installation and Operation

8
49-80777
Installation
Instructions
“If you have questions, call 800.GE.CARES (800.432.2737) or visit our website at: GEAppliances.com”
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
•
IMPORTANT — Save these
instructions for local inspector’s use.
•
IMPORTANT — Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these
instructions for future reference.
• Skill level – Installation of this appliance
requires a qualified installer or electrician.
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is
not covered under the Warranty.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the
event of an electrical short circuit, grounding
reduces the risk of electric shock by providing
an escape wire for the electric current. This
appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug
must be plugged into an outlet that is property
installed and grounded.
WARNING
Improper grounding can result in a risk of
electric shock.
Consult a qualified electrician if the grounding
instructions are not completely understood, or
if doubt exist as to whether the appliance is
properly grounded.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician install an outlet near the appliance.
If you received a damaged vent system, you
should contact your dealer.
PARTS SUPPLIED
Open the carton and remove parts package.
Check contents to be sure all pieces are present.
REMOVE PACKAGING
Remove the shipping materials and the carton;
set carton aside. The carton can be used as a
pad when changing or adjusting vent direction.
TOOLS AND MATERIALS REQUIRED
• Safety glasses
• Large flat-blade screwdriver
• Jigsaw
• Carpenter’s square
• Ductwork to suit the installation
• Level
Downdraft
Vent Systems
4 Stabilizing Brackets
With Screws
1 Remote Switch
2 Filters
1 Wire and White
Connector
INSTALLATION INSTRUCTIONS