Installation Guide

31-7000188 Rev. 0 13
A4. MOUNT THE OVEN (cont)
4. Tighten the two screws to the top of the oven
completely. (While tightening screws, hold
the oven in place against the wall and the top
cabinet.)
5. Install grease filters. See the Owner’s Manual packed
with the oven.
A5. WHEN REPLACING THE
CHARCOAL FILTER
If the model is not vented to the outside, the air will be
recirculated through a disposable charcoal filter that
helps remove smoke and odors.
The charcoal filter should be replaced when it is
noticeably dirty or discolored (usually after 6 to 12
months, depending on hood usage). See your Owner’s
Manual for the filter kit number.
To replace the charcoal filter:
1. Unplug the microwave over or disconnect power.
2. Remove the two vent plate screws located on the top
of the microwave using a #1 Phillips screwdriver.
3. Change the charcoal filter from the vent plate.
4. Replace the vent plate and reinstall the two vent plate
screws located at the top of the microwave using a #1
Phillips screwdriver.
5. Close the microwave door. Plug in the microwave
oven or reconnect power.
Installation Instructions
2. INSTALLATION TYPES (Choose A, B or C)
Charcoal Filter
Vent Plate