Installation Guide

31-7000188 Rev. 0 17
Installation Instructions
2. INSTALLATION TYPES (Choose A, B or C)
B5. MOUNT THE OVEN (cont)
3. Attach the oven to the top cabinet by inserting 2
self-aligning screws through outer top cabinet holes.
Turn two full turns on each screw. Be sure to keep
power cord tight. Be careful not to pinch the
cord, especially when mounting flush tobottom of
cabinet.
4
. Tighten the two screws to the top of the oven
completely. (hile tightening screws, hold the oven in
place against the wall and the top cabinet.
5
. Install grease filters. See the Owner’s Manual packed
with the oven.
B6. ADJUST THE EXHAUST ADAPTOR
Open the top cabinet and adjust the exhaust adaptor to
connect to the house duct.
B7. CONNECTING DUCTWORK
1. Extend the house duct down to connect to the
exhaust adaptor.
2. Seal exhaust duct joints using furnace duct tape for
high temperature applications.
Cabinet Front
Cabinet Bottom Shelf
Filler Block
Oven Top
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
Blower Plate Damper
Back of
Microwave
For Front-to-Back or
Side-to-Side Adjustment,
Slide the Exhaust Adaptor
as needed.
House Duct