Specification

UVM 9125STSS
1.2 Cu. Ft. Over-the-Range Low Profile Sensor Microwave Oven
Specification Revised 6/23
NOTE: Requires 120V grounded outlet. Electrical
receptacle must be located in cabinet above
microwave oven. No additional wiring, venting or
cabinet rebuilding necessary in many cases. Complete
detailed, easy-to-follow installation instructions and
convenient full-size templates are packed with the
microwave oven.
IMPORTANT INFORMATION: When installing the
microwave oven over a range, allow minimum of
2" from bottom of microwave oven to top of range
backguard to allow for removal of light covers.
VENTILATION OPTIONS: The microwave ovens are
designed for adaptation to the following three types
of ventilation:
— Outside exhaust (vertical – as shown and as boxed)
— Outside exhaust (horizontal)
— Recirculating (non-vented ductless – see Filter
Kit drawing)
INSTALLATION INFORMATION: This information is
not intended to be used for installing unit described.
Before installing, consult installation instructions
packed with product/kit for current dimensional data.
CABINET/WALL ATTACHMENT INFORMATION:
Top mount holes are located 13-31/32" from center
line and 10-1/2" from the back of the unit. Wall
mounting bracket and hardware are included.
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
For answers to your Monogram, Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
30″
30″
min.
*
13-3/4″ max.
66″
min.
10-1/4″
18-5/8″
29-7/8″
10-11/16″
29-5/8″
95˚
Door open
(without obstruction)