Specification Sheet

ManualsBrandsGE ManualsCooking Appliances30 Inch Commercial Wall Mount Range Hood with 590 CFM Blower, Hidden Controls, QuietBoost™, Four-Speed Fan Control, LED Hood Light, Wi-Fi, and ADA Compliant

For answers to your Monogram, GE Café

™

, GE Profile

™

or GE Appliances

product questions, visit our website at geappliances.com or call

GE Answer Center

Service, 800.626.2000.

UVW93042P

30" Smart Designer Wall Mount Hood w/Premier Venting

Listed by

Underwriters

Laboratories

Specification Created 4/21

INSTALLATION INFORMATION:

Before installing, consult Use & Care/installation instructions

packed with product for current dimensional data.

OPTIONAL ACCESSORIES

CX10DC9SPSS – 10 (ft.) High Ceiling Duct Cover Kit

CX12DC9SPSS – 12 (ft.) High Ceiling Duct Cover Kit

AMP RATING

120V TBD

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

30" models require a 30"-wide opening

*The supplied duct cover fits 7'-7" to 10'-6" ceiling heights

(12' ceiling height with optional high ceiling kit UX12DC93SS/UX12DC93TS)

(14' ceiling height with optional high ceiling kit UX14DC93SS/UX14DC93TS)

The vent hood must be installed 24" min. above the cooking surface. For optimal performance, installing the

hood more than 36" above the cooking surface is not recommended. The hood installation height above the

cooking surface depends upon ceiling height. The telescopic duct cover conceals the ductwork running from

the top of the hood to the ceiling.

NOTE: Installation height should be measured from the cooking surface to the lowest part

of the hood. This hood may be installed onto a wall and vented to the outdoors, or it can be installed

for recirculating operation. Parts for recirculating operation are supplied with the hood.

20-1/8"

12-1/4"

13-13/16"

29-7/8"

27-1/2"

to 51"

2-3/4"

24" Min

36" Max

Telescopes for

9' and 10'

ceilings

Hood

Installation

Height

(24" to 36")

42" min.

52" max.