Technical Specifications

ValVueFF Software Interface to FVP
88
GE Energy
Diagnostic Parameters
The following diagnostic parameters can be set to values useful to notify if service is
needed.The maximum (default) value for each of the continuous data limits is 2^32-1
(4294967295). Enter realistic values that represent useful maintenance life values.
Travel Limit (strokes) Total travel limit to show the block alarm.
Cycle Count Limit
(times)
Total cycle count limit to show the block alarm.
Open Time Limit
(hours)
Total valve open time limit to show the block alarm.
Close Time Limit
(hours)
Total valve close time limit to show the block alarm.
Near Close Time Limit
(hours)
Total valve near close time limit to show the block alarm.
Model and Serial Number
Both the valve and actuator manufacturer, model number and serial numbers appear.
NOTE AO block setpoint limits do not apply to Set Point when in
Manual Operating State. The AO Block set- point limits are
different from the Position limits configured in the Configure
Position tab. The Position Limits apply to Target Position.