Technical Specifications

ValVueFF Software Interface to FVP
46
GE Energy
Table 7 IVI Faceplate Parameters
Display Display
Type
Parameter Name Remarks
PD - Tag [PD.TAG] This indicates the FVP tag
Operational
State
Active
Control
Device Operation State can be one of
the following:
❑ NORMAL
❑ MANUAL
❑ Out of Service
If no physical device is selected
OFFLINE is displayed as the operation
state.
Setpoint
Signal
[AO.OUT] Desired valve position before
application of characterization and
limits.
Targe t
Position
Slider and
XX.XX%
TB.FINAL_POSITION Desired valve position as derived by
the FF input value into the FVP.
Valve Position Bar and
XX.XX%
TB.FINAL_POSITION _VALUE This indicates valve stem or shaft
position in percent of ranged travel.
Temperature Bar and
XX deg
TB.ELECT_TEMP Device environmental temperature
[-40, 85] °C or [-40, 185] °F
Color: Yellow
Pressure Bar and
XX.XX
PSI
TB.OUT_PRESSURE FVP output pressure for a S/A
positioner or diff. pressure for a D/A
positioner. Blue color.
Scale=TB.SPRING_RANGE
I/P Bar and
XX.XX%
TB.SERVO_OUTPUT_SIGNAL 80 - 100% = Red 20 - 80% = Green 0 -
20% = Yellow
Block Modes Color
coded
individual
boxes
Block.MODE_BLK
Block = RB, TB, AO, DI, or PID
AUTO, Cas
RCas = Green
OOS = Red
MAN = Yellow