Technical Specifications
67
6
Setup Wizard Procedure
The Setup Wizard (Figure 64) is recommended for installing and configuring an FVP
positioner. It is comprised of up to six steps:
❑ “Step 1: Welcome” on page 68 (required)
❑ “Step 2: Actuator Wizard” on page 69 (required)
❑ “Step 3: Tuning Wizard” on page 70 (required for initial valve configuration)
❑ “Step 4: Travel Calibration Wizard” on page 72
❑ “Step 5: Position Control Limits Wizard” on page 75
❑ “Step 6: Finish Setup Wizard” on page 77 (required)